Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Commissioning
Copyright © Symeo GmbH 2010
Page 45 of 87
Figure 41 – TCP/IP Connection to LPR
®
station
TCP/IP Connection:
To open the TCP/IP connection you have to
enter the IP-address and the port number. The
configuration port is 3045 per default. It can be
changed in the web interface of the LPR
®
station (see chapter 6).
RS232 Connection:
T open the serial connection select the right
COM port of your computer.
You can control the COM
port number in the device
manager of your computer.
Figure 42 – Open connection
The following submenus appear:
Download Configuration
 Download of old configuration
Upload Configuration
 Upload of new selected configuration
Antenna Settings
 Calibration of antennas
Distance Data
 Measured Distance(s)
Download Configuration
Before uploading a new application make a
download of the current application to have
these files later as a backup.