Safety Instructions
Manuals
Brands
Symeo Manuals
Electronics
Wireless Module for Local Positioning Radar
41
42
43
44
45
46
47
48
49
50
Table Of Contents
Overview
Safety Instructions
Installation
Repairs
Transport and Storage
Power Supply
Setup and Operation
System Extensions and Accessories
Additional Instructions Regarding Compact Type and Integral Type Stations
System Description
System architecture
Technical Data
System Configuration
System Design
Station-ID (SID)
Group-ID (GID)
FSK Channel (FSK)
Mode of Operation of the System
Application Examples
Redundant arrangement (2xLPR-1DX)
Positioning of Crane Crab (LPR® 1DP2)
Positioning of 2 Cranes on two Runways (LPR® 1DP)
Hardware
LPR® Station (Design Compact Station)
PIN-Assignment of Lumberg Type 0233 08 (Power Supply, RS232-Interface)
PIN-Assignment of Lumberg Typ 0233 14 (Relays)
Cables for LPR® Station
Assembled Cable for power supply and service port
Assembled Cable for relays
LPR® Connection Box
Example Connector Box
LPR® Antenna Types
Adapter for different LPR® Antennas
Installation
Installation of LPR® Station Design Compact Station
Important Instructions for Installation
Installation
Installation of LPR® Antennas
Connecting and Wiring up the Antenna and Cable
Installing the Antenna(s)
Fresnel zone
Installation of Planar Antennas
Commissioning
Requirements
General
Connection to LPR® Station with TCP/IP Interface
Connection LPR® Station with serial Interface
Commissioning Tool – LPR® 1D Wizard
Installation
Utilization of LPR® 1D Wizard
Selection of application
Settings of LPR® System Parameters
Optional: Usage of Relays
Connection to LPR® Station
Download Configuration
Upload Configuration
Antenna Calibration
Display of Distance Data
Web Server
Open Web Server
Settings
„LAN“ area
„Network“ Area
„Serial-to-Ethernet“ Area
ttyAM1 / Parameterization Port
ttyAM2 / Binary Port
„Remote Access“ Area
„Miscellaneous“ Area
„Special Functions“ Area
Accept settings / System Reboot
System Status
Diagnostics
Update Firmware
Step 1 – File system
Step 2 – Linux Kernel
Step 3 – Optional: Userspace
Step 4 – Restart
System Log
Protocol Description Binary XP (1D messages)
General Description
Direction of Data
Structure of Data Packet
Byte Stuffing
CRC
Data Types
Type 0x00 – Distance Data
Type 0x01 – User Data
Type 0x02 – Send Request
Type 0x03 – Relays Switching Command
TCP/IP option: Fixed Frame Protocol
Detailed description TCP Fixed-Frame Protocol
Detailed description UDP Fixed-Frame Protocol
Remarks
LPR®-B Address
Distance Error codes
Trouble Shooting
Programs
Terminal Program
Command Window (only for LPR-B Station with TCP/IP interface)
Telnet (only for LPR-B station with TCP/IP interface)
Browser (only for LPR-B station with TCP/IP interface)
Network Scanner (only for LPR-B station with TCP/IP interface)
Hardware
Connection to the LPR-B station with RS232 interface
Connection inside the LPR-B station
RealTerm (for parameterization port)
Connection to the LPR-B station with TCP/IP interface
LAN Settings of your PC
Check TCP/IP connection
Check TCP/IP connection
RealTerm (for parameterization port)
Web Interface
No Measurements
Appendix A: Agency certifications
United States (FCC) and Canada (Industry Canada)
United States (FCC)
Canada (Industry Canada)
SYMEO
LPR
®
LPR-
1D
Product Documentati
on
Commissioning
Copyright © Symeo G
mbH 2010
Page
48
of
87
the antennas should h
ave a
real distance to each
other of
5 to 20 m.
Display of Dis
tance Data
value(s) is/are sho
wn.
1
...
...
46
47
48
49
50
...
...
87
