Safety Instructions

Table Of Contents

SYMEO LPR

LPR-1D

Product Documentation

Web Server

Page 49 of 87

6 Web Server

The network settings for a LPR

station with TCP/IP interface are described in this chapter.

Therefore it is necessary to open a TCP/IP connection between your computer and the LPR

station.

6.1 Open Web Server

Open your web browser. In the address bar of the web browser enter the IP-address of the

LPR

station: http://192.168.1.99. Press Enter.

The IP-address of the LPR

station is 192.168.1.99 per delivery status

except another IP-address is labeled outside the box.

You can establish a connection with your LPR

stations Web server either

via HTTP or HTTPS if the station has been configured for this (see section

"Settings", "HTTP" and "HTTPS" fields in the "Remote Access" area).

In HTTP connections, the data is transmitted unencrypted. In HTTPS connections, it is

encrypted for transmission (AES-256, 256-bit encryption).

A connection is established with your LPR

station.

In the case of an HTTPS connection, you may

see two dialog boxes. Confirm them both with

OK.

Then the Welcome page for the LPR

station's

Web server will appear.

 Click the function you want in the navigation bar. The individual functions are described in

the following sections.

You will be prompted to enter your information

for authentication.

 Enter user name "symeo" and the

password, and click "OK". The password

has been set to "54all2u" by the

manufacturer.

In order to protect your system from being reconfigured by unauthorized

persons, you should change this to a company password that is only

provided for authorized personnel.