Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Web Server
Copyright © Symeo GmbH 2010
Page 51 of 87
6.2.1 „LAN“ area
MAC-
Address
Unique hardware address of the LPR
®
station on the LAN (Ethernet ID)
(not editable)
Current
Mode
Shows the current mode:
"Static IP-Address" or "DHCP Active".
In "DHCP Active" mode, the LPR
®
station receives a dynamic or reserved IP
address from the DHCP server. You can also ask your administrator or the
SYMEO technical department about this.
If the LPR
®

the reboot within 60 sec an IP-address from the DHCP
server the last applied fixed IP-address is used.
Change
Mode
A button is labeled "DHCP" or "Static" depending on the "Current mode"
field. Click this button to switch from "DHCP Active" mode to "Static IP-
Address" mode or vice versa.
IP-Address
IP address of the LPR
®
station
Per default the IP-address is set to the static IP-address 192.168.1.99.
In "DHCP Active" mode, this address is assigned by the server and cannot
be edited.
In "Static IP-Address" mode you can assign a fixed (static) address here.
Netmask
Net mask of the LPR
®
station
(default: 255.255.255.0)
In "DHCP Active" mode, the net mask is assigned by the server and cannot
be edited.
Gateway
IP address of the standard gateway
(default: 192.168.98.254)
Other LAN segments can be reached with the standard gateway.
In "DHCP Active" mode this address is assigned by the server and cannot
be edited.
6.2.2 „Network“ Area
Hostname
Hostname of the system (default: "lprb-basestation").
In "DHCP Active" mode, this hostname is also communicated to the
DHCP/DNS server.
A name that will be reserved on the DNS server can be entered here. You
can also ask your administrator or the SYMEO technical department about
this.
DNS
IP address of the DNS server:
The DNS server is able to translate hostnames into IP addresses.