Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Web Server
Copyright © Symeo GmbH 2010
Page 53 of 87
Disabled
The port is disabled and not reachable via TCP/IP.
TCP  Listening on Data
Port
The LPR
®
station is waiting for incoming connection on the
“Data Port”. If the connection is opened successful you can
open the parameterization port.
TCP  Connection to
Data Port using Reserve
Port
The LPR
®
station establishes the connection to the entered
server address. Setting “Random” means both
communication partners arrange the reverse channel
autonomously. If the connection is opened successful you
get access to the parameterization port.
ttyAM2 / Binary Port
Network Settings Area:
IP (Server)
For all active Connection Types the IP-address of the server
is required to which the connection should be established.
Data Port
Port-Number of TCP/IP Port. Data of serial interface (ttyAM2)
is sent and received. ttyAM2 is the binary port. Default value
is 3046.
Reverse Port
For all active Connection Types a reverse channel for data
transmission is required.
Serial Settings Area:
Packet Filter
Fixed Frame
none”2,3
type 0x02 (Send request) and data type 0x03 (relay switching
command).
Receive Size
Fixed Frame
size of the received data packed. Example: For 1D-
application a frame size of 15 Byte is sufficient. A smaller
telegram must me filled with 0x00.
Send Size
Fixed Frame
size of the sent data packet. Example: For 1D-applicaiton a
frame size of 21 Byte is sufficient. A smaller telegram is filled
with 0x00 by the LPR
®
station.
Connection Type Area:
Disabled
 reachable via TCP/IP.
TCP  Variable Frame 
Listening on Data Port
The LPR
®
station is waiting for incoming connection on the
“Data Port”. If the connection is opened successful you can
Variable Frame“ Byte
Stuffing
TCP  Variable Frame 
Connecting to Data Port
The LPR
®
station establishes the connection to the entered
server IP-address. Setting “Random” means both
communication partners arrange the reverse channel
autonomously. If the connection is opened successful you
Variable Frame“ means