Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Web Server
Copyright © Symeo GmbH 2010
Page 55 of 87
Password
Remote Access
(Secure SHell), SCP (Secure CoPy) and via the serial port. This enables extended system
information to be retrieved and troubleshooting to be carried out. We recommend that you
disable all functions that are not required, see section "Settings".
In extended system access, the user "SYMEO" has 'ROOT' privileges, i.e.,
full access to the system. Depending on the settings made, the system can
also be damaged and such damage may or may not be reparable. If you
have any questions, please contact the SYMEO technical department.
The enormous range of functions that are available to console access means that only some
can be documented here. To find out more, please contact your IT administrator or Symeo
Support.
6.2.5 „Miscellaneous“ Area
Timezone
If a NTP-server is available and the IP-address of the NTP-server is entered
you can choose the time zone of the LPR
®
station. It is also possible to
enter the time zone manually.
6.2.6 „Special Functions“ Area
Restore
default
Click this button to restore the settings made by the manufacturer.
 Click the "Execute" button (Restore factory default settings) in the
"Special functions" area to cancel all changed settings and restore the
factory settings.
The settings made by manufacturer are activated first after a reboot of the
LPR
®
station. This means that changes of the settings (i.e. IP-address) are
possible.
The settings affected will be deleted and populated directly
with the factory settings.
When the factory settings have been restored, it may be
necessary to proceed as if commissioning the system
again.
Reboot
system
To accept the settings the LPR
®
station must be rebooted. Click this button
to reboot the system.
Before you reboot the system the settings must be loaded
to the LPR
®

Download
settings

configuration as a backup.