Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Web Server
Copyright © Symeo GmbH 2010
Page 59 of 87
Local-Address: LPR
®
Interface address (0.0.0.0  listening to all interfaces)
Foreign Address: IP-address of opposite station
State: Status of connection
Example 2: - successful established connection
Proto
Recv-
Q
Send-
Q
Local-Address
Foreign
Address
State
tcp
0
1
192.168.1.99:3045
192.168.1.1:1333
ESTABLISHED
- (ttyAM1) is enabled this table shows
further connection information.
Proto: Protocol (TCP, UDP)
Recv-Q: Number of buffered Bytes, which are received from the LPR
®
station
Send-Q: Number of buffered Bytes, which the LPR
®
station should send
Local-Address: LPR
®
Interface address (192.168.1.99) with port (3045)
Foreign Address: IP-address of opposite station (192.168.1.1) with port (1333)
State: Status of connection
6.5 Update Firmware
With this function you can update the firmware.
The firmware can be updated for example when a firmware with improved functional scope is
available for the LPR
®
system.
But the system can also be irreparably damaged by a firmware update.
Please make absolutely sure that the files are correct (file names and the
version has been released by SYMEO), and proceed carefully and
methodically. If the firmware update has not been carried out properly, or if
problems arise of the system can no longer be accessed, contact Symeo
Support.
For FCC/IC authorization: Only firmware delivered for the U.S./ Candian
market is allowed to install. Other firmaware may violate the FCC/IC
authorization.
 Click "Firmware Update" in the navigation bar.
If you have not yet provided authentication information, you will be prompted to do so
now.
The Firmware Update for the LPR
®
station's Web server is displayed.