Safety Instructions
Table Of Contents
- Overview
- System Description
- Hardware
- Installation
- Commissioning
- Web Server
- Protocol Description Binary XP (1D messages)
- Trouble Shooting
- Appendix A: Agency certifications
SYMEO LPR
®
LPR-1D
Product Documentation
Overview
Copyright © Symeo GmbH 2010
Page 7 of 87
1 Overview
SYMEO Industrial LPR
®
is a system for contactless, real-time determination of distances and
positions.
LPR
®
1D is a distance measurement system which is particularly well suited for use in very
harsh, industrial environments, in which other systems such as mechanical rotary encoders
or lasers cannot function for long periods.
The Local Positioning Radar System LPR
®
1D consists of equal components, which are
LPR
®
Base Station or LPR
®
Transponder
Figure 1 – LPR
®
hardware: transponder or base station in the design “Compact Station”
The difference is between a LPR
®
1D transponder and a LPR
®
1D Base Station is only the
software but not the hardware. A LPR
®
1D system consist exactly of one component
transponder, named below also as station 1 or as coordinator. And it consists furthermore of
one to four LPR
®
1D components Base Station, subsequent named station 2, 3, 4, 5.
®
1D hardware has different interfaces. The
station in the design compact station has IP65 protection.
Overview
Antenna Interfaces
2, 3 or 4
Power Supply
10-36 Volt via 8-Pin Lumberg Connector
RS232
Configuration and Data Interface
TCP/IP
Optional: Configuration and Data Interface
Relay
Optional: 7 Dry Contacts