Safety Instructions

Table Of Contents

SYMEO LPR

LPR-1D

Product Documentation

Trouble Shooting

Page 78 of 87

8.5.1 LAN Settings of your PC

First you need to disconnect your PC from your network to avoid trouble when changing the

IP address of your computer. Now you connect the LPR-B station via an Ethernet cable with

your PC. If you are not in the same net as the LPR-B station you have to change temporary

the network settings of your PC. Both IP-address must be in the same network, i.e. the first

three fields of the IP-address must match.

Open your network

connection and set a

fixed IP address to

your computer, i.e.

192.168.1.1. The

subnet mask should be

set to 255.255.255.0.

Click in both windows

OK.

If your firewall is enabled and set to restrictive, it might happen that you

cannot access the LPR-B station. In this case disable the firewall settings

temporary in the tab Advanced in the window Network properties.

8.5.2 Check TCP/IP connection

The first way to check the IP-connection from your computer to the LPR-

the LPR-B station. Open the command window (Window button Start  Run  Enter cmd

and click on OK).

Enter in the window 192.168.1.99 –t and click Enter.