Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Overview
Copyright © Symeo GmbH 2010
Page 8 of 87
In special application cases it is also possible to get a LPR
®
station with an
integrated antenna. This hardware is called LPR
®

compared to the hardware LPR
®

Figure 2 – LPR
®
Hardware – Special Case: Transponder or Base Station with integrated
antenna in the design “Integral Station”
The LPR
®
1D Station with an integrated antenna is available in a plastic housing. An
installation description is delivered separately to this document.
This antenna is not approved to be in compliance with part 15 of FCC rules
and with RSS-210 of Industry Canada. Usage of these antennas may void
the FCC/ IC authorization to operate this equipment.
Further information is found in the Appendix.
1.1 Safety Instructions
LPR
®
-B systems are purely tracking and assistance systems. They
therefore do not satisfy the safety class 3 requirements and must not be
used as standalone systems in safety-critical applications, such as
automation or anti-collision.
Follow the safety instructions in the operating instructions for the device
and the additional documentation!
Keep these safety instructions and other documents together with the device.
1.2 Installation
All installation, repair and servicing work must be carried out by qualified
and trained technicians!
1.3 Repairs
Repairs to the device must be carried out by authorized technicians.
Unauthorized opening and incorrect repairs could result in severe danger
to the user (danger of electric shock, radiated energy, fire hazard).