Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Trouble Shooting
Copyright © Symeo GmbH 2010
Page 80 of 87
In both cases you can click inside the window
and press the button 3. If nothing appears than
there is something wrong with the connection
between the LPR-B station and your computer
or the station has no power.
Normally it shows you some system
information:
In the upper line is written the System Address:
The system address indicates if the station is a
transponder or a base station and which group
ID the station has.
If you press button 1 (configuration menu) and
button 6 (setup) then you can get more detail
about the system. Click maybe on freeze to
enable the scroll bar and scroll up to setup
menu. Note the point  channel.
With the character x you return to the main
menu.
Note here the information the station has/ stations have.
Master Transponder/ Base Station: _____________________
Station ID: _____________________
Group ID: _____________________
FSK channel: _____________________
-------------------------------------------------------------------------------------------------------------------------
Master Transponder/ Base Station: _____________________
Station ID: _____________________
Group ID: _____________________
FSK channel: _____________________
-------------------------------------------------------------------------------------------------------------------------
Master Transponder/ Base Station: _____________________
Station ID: _____________________
Group ID: _____________________
FSK channel: _____________________
If you compare the settings with the other stations in the systems, following settings must be
made. You need exactly one master transponder. The other stations must be base stations.
 The group ID must be identical for all stations in the system.
 The FSK channel must be identical for all stations in the system.
 The base stations must have different station IDs.