Safety Instructions
Table Of Contents
- Overview
- System Description
- Hardware
- Installation
- Commissioning
- Web Server
- Protocol Description Binary XP (1D messages)
- Trouble Shooting
- Appendix A: Agency certifications
SYMEO LPR
®
LPR-1D
Product Documentation
Trouble Shooting
Copyright © Symeo GmbH 2010
Page 81 of 87
If you do not get access to the LPR-B station check if the port is open. The port for the
parameterization is 3045 per default. But it might be possible that you have changed it or did
not open it (see chapter 8.5.5).
8.5.5 Web Interface
-address of the LPR-B station but do not get data (either via the
parameterization port or the binary port or both ports) you have to check the settings on the
web page of the LPR-B station.
Open a web browser and enter the IP-address of the LPR-B station (i.e. http://192.168.1.99).
You get access to the LPR-B station. If you are
connected via HTTPS-connection, it might
appear to dialogue boxes which you have to
confirm with OK.
You see the Start-page of the LPR-B station.
Click on Settings.
You have to authorize yourself.
symeo
OK
54all2u
The Settings page of the Web-interface of the LPR-B station looks like the following.