Safety Instructions

SYMEO LPR
®
LPR-1D
Product Documentation
Appendix A: Agency certifications
Copyright © Symeo GmbH 2010
Page 86 of 87
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help
This device has been designed to operate with the antennas listed below.
Antennas not included in this list are strictly prohibited for use with this
device. Only antenna cables delivered by Symeo are allowed to use. Usage
of other antenna cables may void the FCC authorization to operate this
equipment.
23 dBi Planar Antenna
vertical
9°
-3 dB
0 dB
-3 dB
horizontal
9°
-3 dB
0 dB
-3 dB
A
B
A = 305mm
B = 305mm
d = 25mm
Antenna Connector Type N
Figure 46: LPR
®
1D antenna
Canada (Industry Canada)
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003
du Canada.
This device has been designed to operate with the antennas listed below and
having a maximum gain of 23 dBi. Antennas not included in this list or having
a gain greater than 23 dBi are strictly prohibited.
The required impedance for antenna and antenna cable is 50 ohms.
Only antenna cables delivered by Symeo are allowed to use. Usage of other
antenna cables may void the IC authorization to operate this equipment.