Installation Guide

Model Number Speciﬁcation

Dimensions

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Warranty

Hair Dryer Holder

Operation & Maintenance Manual

0368-3HDH

Note: Dimensions subject to change without notice.

For California Residents

WARNING: This product contains chemicals known to

the State of California to cause cancer, birth defects, or

other reproductive harm.

Compliance



0368-3HDH Hair Dryer Holder

Hair dryer holder made from metal construction, plated in

standard polished chrome nish.

Measurements

A 1-1/4", 32 mm

B 3/8", 10 mm

C 5", 127 mm

D 3-1/8", 79 mm

E 1-1/4", 32 mm

F Ø 3", 76 mm

(2x) Hole Size

Ø 5/16", 8 mm

H Ø 5/16", 8 mm

PAGE 1
0368-3HDH Hair Dryer Holder Operation & Maintenance Manual Model Number Specification  0368-3HDH Hair Dryer Holder Hair dryer holder made from metal construction, plated in standard polished chrome finish. Compliance Warranty For California Residents WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Limited Lifetime - to the original end purchaser in consumer installations. 5 Years - for commercial installations.
PAGE 2
Parts Breakdown Replacement Parts D Item Description Part Number B D Mounting Hardware Kit RA-019 C B A D Tools Required Allen Wrench (3/32") B Drill E E Phillips Head Screwdriver Installation 1) Place mounting bracket (C) into desired position and mark drill hole locations. Remove mounting bracket (C) and install two self drilling anchors (D) into wall. 2) R eposition mounting bracket (C) on self drilling anchors (D) and secure to wall with two screws (B).