Specification
Identity
®
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2017 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-1787 REV A ■ 092217
Model Numbers Feature Highlights
053
Diverter Tub Spout
Specification Submittal
☐
053 Diverter Tub Spout
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Warranty
Note: Append appropriate -sufx to model number.
Options/Modifications
☐
-STN Satin Nickel finish
• 5-1/2" length
• 1/2" inlet
• Pull-up diverter
• Metal construction
• Slip on installation
2-7/8" max.
Tighten with 5/32"
hex socket key
Caution: Ensure seal is not damaged by making
sure outside of 1/2 inch diameter tube is free of
burrs and sharp edges prior to tub spout installation.
Tube length from nished wall should be
1-1/2" min. to 2-7/8" max.
Note: Dimensions subject to change without notice.
Dimensions Tub Spout with Diverter, 053 (Slip spout)
Diverter
5-1/2" (140 mm)
1/2" inlet
Finished wall
1-1/2" min.