Specification
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.com ■ ZV-1773 REV 0 ■ 120619
PRESSURE BALANCING TUB/SHOWER VALVE BODY
SPECIFICATION SUBMITTAL
Temptrol
®
WARRANTY
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for com-
plete warranty information.
OPTIONS/MODIFICATIONS
☐
-BR
Mounting bracket
☐
-CHKS
Integral check stops for use in
installations where a positive
shut-off device is used
downstream of valve
☐
-RV
Reverse seat for back to back
installations
INLET/OUTLET ADAPTERS
☐
-CP CPVC ttings
☐
-P1 PEX crimp ttings
☐
-P2 PEX expansion ttings
5-3/8"
(137 mm)
5-3/8"
(137 mm)
2-5/8"
(67 mm)
2-5/8"
(67 mm)
1-5/8"
(41 mm)
1-5/8"
(41 mm)
5-5/8"
(143 mm)
(opened fully CCW)
5-5/8"
(143 mm)
(opened fully CCW)
3"
(76 mm)
3"
(76 mm)
Rough-in
2-3/8" ± 1/2"
(60 mm ± 13 mm)
Rough-in
2-3/8" ± 1/2"
(60 mm ± 13 mm)
Finished Wall
1/2" (13 mm)
Finished Wall
1/2" (13 mm)
2-1/8"
(54 mm)
2-1/8"
(54 mm)
1-5/8"
(41 mm)
1-5/8"
(41 mm)
6"
(152 mm)
6"
(152 mm)
6-5/8"
(168 mm)
6-5/8"
(168 mm)
P/N 262XBODYP/N 262XBODY
P/N RTS-076P/N RTS-076
P/N 262XP2BODYP/N 262XP2BODY
6-7/8"
(175 mm)
6-7/8"
(175 mm)
7-1/2"
(191 mm)
7-1/2"
(191 mm)
P/N 262XP1BODY
P/N 262XP1BODYP/N 262XCPBODYP/N 262XCPBODY
7-5/8"
(194 mm)
7-5/8"
(194 mm)
MODEL NUMBERS
☐
262XBODY
Pressure Balancing tub/shower valve body
☐
162XBODY
Pressure Balancing tub/shower valve body
pressure testing cap
FEATURE HIGHLIGHTS
• Brass, bronze and stainless steel construction
• Pressure balancing mixing valve to maintain
safe shower temperature
• Adjustable stop screw to control maximum hot
water temperature to valve
• Integral service stops allow water shut-off for
valve servicing
• 4 port valve body in common plane
• Inlets: 1/2" IPS and 1/2" sweat
• Outlets: 1/2" IPS and 1/2" sweat
• Accommodates back to back installations
• Accommodates thin wall installations
• Stringer mounts included
COMPLIANCE
• ASME A112.18.1/CSA B125.1
• ASSE 1016
• Buy American Act Compliant