Specification

ManualsBrandsSymmons ManualsPlumbingDia 1-Handle Shower Valve Trim in Chrome (Valve Not Included)

Dia

Feature Highlights Options/Modiﬁcations

3500-CYL-B-TRM, 3500CYLBTRMTC

Shower Valve Trim

Speciﬁcation Submittal

Location:

• Dia Shower Valve Trim

• Requires Temptrol

Pressure Balancing Shower Valve

• Metal lever handle

• Showerhead not included

• Tub spout not included

• Components shall be metal and nonmetallic construction, plated in

standard Polished Chrome nish

• Available with TA-10 ow control spindle and T-12A cap assembly

for Temptrol valve bodies installed with Test Cap

(order p/n 3500CYLBTRMTC)

• ASME A112.18.1/CSA B125.1

Model Numbers

☐

3500-CYL-B-TRM

Shower Trim, Temptrol Pressure Balancing Shower Valve ordered

separately

☐

3500CYLBTRMTC

Shower Trim with TA-10 ow control spindle and

T-12A cap assembly, must order Temptrol valve with Test Cap

Compliance

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete warranty information.

Go to www.symmons.com/register to register your Symmons product.

Note: Append appropriate -sufx to model number.

☐

Delete

Sufﬁx B

Chrome plastic escutcheon on valve with color

graphic/indicators in place of standard brass

escutcheon

☐

-REB Rebuild trim kit, includes TA-10 and TA-4

☐

-VP Vandal resistant escutcheon screws in place of

standard screws

☐

-BBZ Brushed Bronze ﬁnish

☐

-MB Matte Black ﬁnish

☐

-STN Satin Nickel ﬁnish

Summary of content (2 pages)

PAGE 1
Location: Dia ® 3500-CYL-B-TRM, 3500CYLBTRMTC Shower Valve Trim Specification Submittal Feature Highlights • • • • • • Dia Shower Valve Trim Requires Temptrol® Pressure Balancing Shower Valve Metal lever handle Showerhead not included Tub spout not included Components shall be metal and nonmetallic construction, plated in standard Polished Chrome finish Available with TA-10 flow control spindle and T-12A cap assembly for Temptrol valve bodies installed with Test Cap (order p/n 3500CYLBTRMTC) Options/Mo
PAGE 2
Dimensions Measurements A B C D E A C D B Ø 7-1/2", 191 mm Ref. 42", 1067 mm 3", 76 mm 2-7/8", 73 mm Rough-in 2-3/8" ± 1/2", 60 mm ± 13 mm E FLOOR Notes: 1) Valve body and piping not included and shown as reference only. 2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater. 3) All dimensions measured from nominal rough-in (see E as reference). 4) Dimensions subject to change without notice. Symmons Industries, Inc.