Specification Sheet

ManualsBrandsSymmons ManualsPlumbingDia Collection Wall Mounted Shower Valve Trim with Lever Handle in Brushed Bronze

Dia

Feature Highlights Options/Modiﬁcations

3500-CYL-B-TRM, 3500CYLBTRMTC

Shower Valve Trim

Speciﬁcation Submittal

• Dia Shower Valve Trim

• Requires Temptrol

Pressure Balancing Shower Valve

• Metal lever handle

• Showerhead not included

• Tub spout not included

• Components shall be metal and nonmetallic construction,

plated in standard Polished Chrome ﬁnish

• Available with TA-10 ﬂow control spindle and T-12A cap

assembly for Temptrol valve bodies installed with Test Cap

(order p/n 3500CYLBTRMTC)

• ASME A112.18.1/CSA B125.1

Model Numbers

☐

3500-CYL-B-TRM

Shower Trim, Temptrol Pressure Balancing Shower Valve

ordered separately

☐

3500CYLBTRMTC

Shower Trim with TA-10 ﬂow control spindle and

T-12A cap assembly, must order Temptrol valve with Test

Cap

Compliance

Note: Append appropriate -sux to model

number.

☐

Delete

Sux B

Chrome plastic escutcheon on valve with

color graphic/indicators in place of standard

brass escutcheon

☐

-REB Rebuild trim kit, includes TA-10 and TA-4

☐

-VP Vandal resistant escutcheon screws in place

of standard screws

☐

-BBZ Brushed Bronze ﬁnish

☐

-MB Matte Black ﬁnish

☐

-STN Satin Nickel ﬁnish

☐

-L7 Less handle

Summary of content (2 pages)

PAGE 1
Dia ® 3500-CYL-B-TRM, 3500CYLBTRMTC Shower Valve Trim Specification Submittal Feature Highlights • • • • • • • Dia Shower Valve Trim Requires Temptrol® Pressure Balancing Shower Valve Metal lever handle Showerhead not included Tub spout not included Components shall be metal and nonmetallic construction, plated in standard Polished Chrome finish Available with TA-10 flow control spindle and T-12A cap assembly for Temptrol valve bodies installed with Test Cap (order p/n 3500CYLBTRMTC) Model Numbers ☐ 350
PAGE 2
Dimensions Measurements A B C D E A C B D Ø 7-1/2", 191 mm Ref. 42", 1067 mm 3", 76 mm 2-7/8", 73 mm Rough-in 2-3/8" ± 1/2", 60 mm ± 13 mm E FLOOR Notes: 1) Valve body and piping not included and shown as reference only. 2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater. 3) All dimensions measured from nominal rough-in (see E as reference). 4) Dimensions subject to change without notice. Symmons Industries, Inc.