Specification

Dia
®
Feature Highlights Options/Modifications cont.
3502-CYL-B
Tub/Shower System
Specification Submittal
Location:
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Warranty
Metal lever handle
Adjustable stop screw to limit handle turn
7" diverter tub spout
1 mode showerhead
2.5 gpm (9.5 L/min) standard ow restrictor
Components shall be metal and nonmetallic construction,
plated in standard polished chrome nish
Compliance
- ASME A112.18.1/CSA B125.1
Model Numbers
3502-CYL-B
Tub/Shower System with Symmons
Temptrol
®
4-port pressure balancing mixing valve
46-2-BODY
Symmons Temptrol
4-port pressure balancing mixing valve
46-2X-BODY
Symmons Temptrol
4-port pressure balancing mixing valve
with integral service stops
Options/Modifications
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
Delete
Suffix B
Chrome only plastic escutcheon on valve
with color graphics/indicators
-IPS 1/2" female IPS connections
-L/HD Less showerhead
-REB Rebuild trim kit, includes TA-10 and TA-4
-REV Reverse coring, hot on right, cold on left,
for back to back installations
-SH2 Alternative 352SH-3, 3 mode showerhead
(Chrome and Satin Nickel finish only)
-SH3 Alternative 362SH Duro showerhead
-SH4 Alternative 361SH Duro square showerhead
-SS Slip spout on any tub/shower unit
-T2 Alternative 361DTS, diverter square tub
spout
-TRM Trim only, valve must be ordered separately
-VP Vandal resistant escutcheon screws in
place of standard screws
-X Integral service stops - allows water shutoff
at valve for service
-X-CHKS Integral check stops - for use in installations
where a positive shut-off device is used
downstream of mixing valve
-BBZ Brushed Bronze finish (available 2018)
-MB Matte Black finish (available 2018)
-STN Satin Nickel finish
Note: Append appropriate -sufx to model number.
CG

Summary of content (2 pages)