Installation Sheet

5
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3047 REV 0 01/29/2014
3503-H321-V-CYL-B-TRM, 3505-H321-V-CYL-B-TRM,
3506-H321-V-CYL-B-TRM
Dia
™
Trim Series
Operation & Maintenance Manual
Installation
7a) Dry Wall Option: R emove upper
and lower caps (P) from 30" slide
bar brackets. Place 30" slide bar
(R) into desired position. Using
brackets as a guide, carefully drill
3/16" holes into wall. Remove
30" slide bar and install anchors.
Notes: Make sure that 30" slide
bar holes and bracket holes are
aligned before drilling. Before
drilling bottom hole, make
sure 30" slide bar is plumb.
7b) Stud Option: R emove upper and
lower caps (P) from 30" slide bar
brackets. Place 30" slide bar
(R) into desired position. Using
brackets as a guide, carefully drill
1/8" pilot holes into stud.
Notes: Make sure that 30" slide bar
holes and bracket holes are aligned
before drilling. Before drilling bottom
hole, make sure 30" slide bar is
plumb.
8) With 30" slide bar (R) in position,
secure to wall using screws (Q).
Replace upper and lower caps (P)
onto 30" slide bar brackets.
4
4
1
1
2
2
3
R
P
P
1
1
2
2
3
R
P
P
2
2
1
Q
RR
P
P