Specification

Dia

™

3531-B

Shower System

Speciﬁcation Submittal

Model Numbers Speciﬁcations

3531-B

Dia Shower System

Shower system powered by the Temptrol

Pressure

Balancing valve. Features 1 mode showerhead and standard

2.5 gpm (9.5 L/min) ow restrictor. Components made from

metal and nonmetallic materials plated in standard

polished chrome nish.

Modiﬁcations Compliance

-1.5 1.5 gpm (5.7 L/min) ﬂow restrictor

-SH2 Round, 3 mode showerhead

-SH3 Round, 1 mode showerhead

-SH4 Square, 1 mode showerhead

Note: Append appropriate -sufx to model number.

-ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

PAGE 1
Dia™ 3531-B Shower System Specification Submittal Model Numbers 531-B 3 Dia Shower System Modifications Specifications Shower system powered by the Temptrol® Pressure Balancing valve. Features 1 mode showerhead and standard 2.5 gpm (9.5 L/min) flow restrictor. Components made from metal and nonmetallic materials plated in standard polished chrome finish. Compliance -1.5 1.5 gpm (5.
PAGE 2
Dimensions Measurements A A B C D E F G H Ø 2 1/2", 64 mm 6 3/4", 171 mm 77", 1956 mm 3 1/2", 89 mm Ø 7 1/2", 191 mm 42", 1067 mm 1 3/8", 35 mm 2 7/8", 73 mm Rough-in I 2 3/8" ± 1/2", 60 mm ± 13 mm J 6 3/4", 171 mm K 6", 152 mm L 5 5/8", 143 mm B C D E G H I F Floor -SH2 J -SH3 K -SH4 L Notes: 1) All dimensions measured from nominal rough-in (see I as reference). 2) Dimensions are subject to change without notice. Symmons Industries, Inc.