Specification

Duro

™

3602

Tub/Shower System

Speciﬁcation Submittal

Model Numbers Speciﬁcations

3602

Duro Tub/Shower System

Tub/shower system powered by the Temptrol

Pressure

Balancing valve. Features diverter tub spout, 1 mode

showerhead and standard 2.5 gpm (9.5 L/min) ow restrictor.

Components made from metal and nonmetallic

materials plated in standard polished chrome nish.

Modiﬁcations Compliance

-1.5 1.5 gpm (5.7 L/min) ﬂow restrictor

-SH1 Round, 1 mode showerhead

-SH2 Round, 3 mode showerhead

-SH4 Square, 1 mode showerhead

-T2 Square, diverter tub spout

Note: Append appropriate -sufx to model number.

-ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

PAGE 1
Duro™ 3602 Tub/Shower System Specification Submittal Model Numbers 3602 Duro Tub/Shower System Modifications Specifications Tub/shower system powered by the Temptrol® Pressure Balancing valve. Features diverter tub spout, 1 mode showerhead and standard 2.5 gpm (9.5 L/min) flow restrictor. Components made from metal and nonmetallic materials plated in standard polished chrome finish. Compliance -1.5 1.5 gpm (5.
PAGE 2
Dimensions A A B C D E F G H I J B K C L M D N O P Q R S T U E I H G F -SH4 L M V K N Floor -SH1 J Measurements Ø 2 1/2", 64 mm 6", 152 mm 77", 1956 mm 3 1/2", 89 mm 7 1/2", 191 mm Ø 2 1/2", 64 mm 32", 813 mm 12", 305 mm 3 1/8", 79 mm 3 1/2", 89 mm Rough-in 2 3/8" ± 1/2", 60 mm ± 13 mm 5 1/2", 140 mm Male 1/2-14 NPT fitting must protrude 5 1/2" (140 mm) from finished wall 7", 178 mm 6 3/4", 171 mm 6 3/4", 171 mm 5 5/8", 143 mm 2 1/4", 57 mm 2 3/4", 70 mm 3/8", 10 mm 6 1/2", 165 mm Female