Installation Guide

ManualsBrandsSymmons ManualsBathDuro Single-Handle 1-Spray Tub and Shower Faucet with Stops in Chrome

Tub-Shower Systems 3600, 3601, 3602 Series

Installation and Service Instructions

Duro™

1 2 3 4

Handle kit

T-617

Tub spout

352TS

COLD

supply inlet

HOT

supply inlet

Screwless escutcheon kit

RTS-001

Showerhead

362SH

Protective valve shield (not shown) T-176

Temp Limit

stop screw

Escutcheon

mounting plate

Note: Piping, ttings and tools are not included.

Actual plumbing should be determined and

installed by a licensed plumber.

Mounting

plate, T-177

Arm and ange

300S

Tools & Materials

Temptrol

Control Valve

4000-BODY

4000-X-BODY

Model Series

3602

3602-X

3602-TRM

Model Series

3601

3601-X

3601-TRM

3602

3602-X

3602-TRM

Model Series

3600

3600-X

3600-TRM

3601

3601-X

3601-TRM

3602

3602-X

3602-TRM

Model Series

3600

3600-X

3600TS

3600TS-X

3601

3601-X

3602

3602-X

1/8"

Dome

cover

1/8"

4 mm

Visual Guide Duro Tub-Shower Systems, 3600, 3601, 3602 Series

Model Number Series

3602.............. Tub-Shower System

3602-X

.......... Valve includes stops

3602-TRM

.... Trim only

3601.............. Shower System

3601-X .......... Valve includes stops

3601-TRM

.... Trim only

 Need Help?

Symmons customer service:

P: (

800) 796-6667, F: (800) 961-9621

customerservice@symmons.com

Mon - Fri 7:30 am - 7:00 pm EST



www.symmons.com/service

• Technical help

• Product information

• Warranty policy

3600.............. Shower Valve System

3600-X

.......... Valve includes stops

3600-TRM

.... Trim only

Summary of content (6 pages)

PAGE 1
Duro™ Tub-Shower Systems 3600, 3601, 3602 Series Installation and Service Instructions  Model Number Series 3602.............. Tub-Shower System 3602-X........... Valve includes stops 3602-TRM..... Trim only 3600.............. Shower Valve System 3600-X........... Valve includes stops 3600-TRM..... Trim only Need Help? Symmons customer service: P: (800) 796-6667, F: (800) 961-9621 customerservice@symmons.com Mon - Fri 7:30 am - 7:00 pm EST 3601.............. Shower System 3601-X...........
PAGE 2
Installation Instructions Rough-in Installation Control valve assembly, piping and fittings (Note: Illustrations below show valve model without stops) Reference as required: Page Visual guide.....................................1 Dimensions illustration.................4 1) Determine wall thickness ■■ Determine type of wall and wall thickness where valve will be mounted. ■■ Consider whether to use mounting plate by reviewing figure 2 below. ■■ Skip ahead to Step 3 if mounting plate is not used.
PAGE 3
7) Flush system, check for leaks 2) Attach escutcheon 5) Attach showerhead ■■ Turn valve to the warm position and run for a few minutes. ■■ If system is dirty, remove valve spindle in center of valve to ensure proper flushing. (See service instructions.) ■■ Check for leaks around valve assembly and all pipe fittings.
PAGE 4
Dimensions Duro Tub-Shower Systems, 3600, 3601, 3602 Series Model Series 3601 3601-X 3602 3602-X finished wall 2-1/2" dia (64 mm) 6" (151 mm) 1/2"-14 NPT 4-5/8" (118 mm) Model Series 3600 3600-X 3601 3601-X 3602 3602-X approx 77" (1956 mm) showerhead supply outlet Finished wall to pipe centerline 2-3/8" ± 1/2" (60 mm ±13 mm) *see note (2) 5/8" (16 mm) Finished wall to rear of valve 3-1/2" ± 1/2" (89 mm ±13 mm) Wall cutout hole size 3-1/2" (89 mm) min 4" (101 mm) max mounting plate p/n T-177 *Note
PAGE 5
Parts Assembly Temptrol Shower & Tub-Shower Control Valves ■ 4000-BODY..........Shower valve, Tub-Shower valve ■ 4000-X-BODY......
PAGE 6
Trouble Shooting Chart Problem Cause Solution Valve will not pass water. Both hot and cold water supplies are not turned on. Turn on both supplies. Valve will not operate unless both hot and cold water pressure is on. Valve leaks when shut off. Hot and cold washers are worn or foreign matter (dirt, chips) is lodged between washers and seat surfaces. 1) Replace washers using control spindle washer repair kit, p/n TA-9. 2) Replace hot & cold seats using hot/cold seat repair kit, p/n TA-4.