Installation Guide

5
Installation
7a) Dry Wall Option: R emove upper
and lower caps (M) from slide bar
brackets. Place slide bar (O) into
desired position. Using brackets
as a guide, carefully drill 3/16"
holes into wall. Remove slide bar
and install anchors.
Notes: Make sure that slide bar
holes and bracket holes are aligned
before drilling. Before drilling bottom
hole, make sure slide bar is plumb.
7b) Stud Option: R emove upper and
lower caps (M) from slide bar
brackets. Place slide bar (O) into
desired position. Using brackets
as a guide, carefully drill 1/8"
pilot holes into stud.
Notes: Make sure that slide bar holes
and bracket holes are aligned before
drilling. Before drilling bottom hole,
make sure slide bar is plumb.
8) With slide bar (O) in position,
secure to wall using screws (N).
Replace upper and lower caps (M)
onto slide bar brackets.
4
4
1
1
2
2
3
O
M
M
1
1
2
2
3
O
M
M
2
2
1
N
OO
M
M