Installation Sheet

ManualsBrandsSymmons ManualsBathroom HardwareDuro Wall Mounted Pivoting Toilet Paper Holder with Assist Bar

Duro

Model Numbers Feature Highlights

☐

363GBTP Toilet Paper Holder with Assist Bar

Dimensions

Note: Dimensions subject to change without notice.

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Warranty

Note: Append appropriate -sufx to model number.

Finish Options

☐

-STN Satin Nickel ﬁnish

• Supports up to 250 lbs. as an assist bar

• 7/8" bar diameter

• 2" square ange

• Bar extends 2-1/8" from wall

• Concealed mounting for a clean look

• Pivoting tissue holder for easy loading

• Mounting hardware and mounting plate included

• Metal construction in standard polished chrome nish

• WingIts compatible

363GBTP

ADA Toilet Paper Holder with Assist Bar

Operation & Maintenance Manual

FINISHED WALLFINISHED WALL

Measurements

A 8", 203 mm

Load bearing surface supports

up to 250 lbs. as an assist bar

C Ø 7/8", 22 mm

D (2x) Sq. 2", 51 mm

E 19/32", 15 mm

F 6", 152 mm

(2x) Hole Size

Ø 7/64", 3 mm

H 3-3/16", 81 mm

I 3-3/8", 86 mm

J 3/8", 10 mm

K 2-1/8", 54 mm

L 4-11/16", 119 mm

Summary of content (6 pages)

PAGE 1
Duro ® 363GBTP ADA Toilet Paper Holder with Assist Bar Operation & Maintenance Manual Model Numbers Feature Highlights ☐ 363GBTP • • • • • • • • • Toilet Paper Holder with Assist Bar Finish Options ☐ -STN Supports up to 250 lbs.
PAGE 2
Parts Breakdown WALL STUD MOUNTING ANCHOR FOR DRYWALL APPLICATIONS WALL Tools Required for All Installations 3/8" Drill 7/16" Hex Socket with 3/8" Drive Ratchet Pencil Phillips Head Screwdriver Safety Glasses Silicone Drill Bit Sizes Stud Finder Installing to Wall Studs Only Wall Stud Pilot Hole: 7/64" Drill Bit Through Ceramic Tile: 5/16" Carbide Tip Drill Bit Installing Mounting Anchor Drywall Pilot Hole: 1" Drill Bit Through Ceramic Tile: 1" Carbide Tip Drill Bit IMPORTANT NOTES FOR PROPER INST
PAGE 3
Installation (Wall & Wall Studs) 1) Place Toilet Paper Holder at desired position. Mark the centers on each end with a pencil. 2) Remove Toilet Paper Holder from wall. Use drill with 7/64" drill bit to drill holes into wall and wall studs at the marked positions. 3) Use ratchet and lag bolt to attach mounting bracket to wall. Do not overtighten. Repeat step for opposite end, and then tighten both brackets so they are secured to wall. 4) Attach ends of Toilet Paper Holder to mounting brackets.
PAGE 4
Installation (Drywall & Wall Stud with Mounting Anchor) 1) Place Toilet Paper Holder at desired position. Mark the centers on each end with a pencil. Follow steps 1-3 for wall and wall studs (page 3) to install bracket to wall stud. 2) Use drill with 1" drill bit to drill holes into drywall at the marked position. 3) Hold white flange upright and insert mounting anchor bar into drywall hole with the arrow facing toward the drywall.
PAGE 5
Troubleshooting Chart Problem Finish is spotting. Cause Elements in water supply may cause water staining on finish. 5 Solution Clean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse with water.
PAGE 6
For California Residents WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621 Copyright © 2017 Symmons Industries, Inc. ■ symmons.com ■ gethelp@symmons.