Installation Sheet

Duro
Drill
MEASUREMENT
BEFORE INSTALLATION
1
2
3
RECOMMENDED
TOOLS AND MATERIALS
Flathead Screwdriver,
Phillips Screwdriver
Hex Wrench
Tape Measure
n All specifications subject to change without
prior notice. (Unit = inch)
Affix your mounting hardware to the wall using your
mounting screws.- For walls with brick or other types
on masonry we suggest using nylon plugs. For cavity
walls we suggest using toggle anchors if you are unable
to screw into studs.
Measure and mark holes as listed in the above table.
Drill screw mounting holes using a B size drill bit(0.238).
-IMPORTANT: Ensure that the holes you have drilled for
installation are level.
ACCESSORIES INSTRUCTION
363TB-18 Towel bar
363TB-24 Towel bar
363DTB-18 Towel bar
363DTB-24 Towel bar
363TS-22 Towel shelf
363TR Towel ring
363RH Robe hook
363TP Paper holder
363TB-18 & 363TB-24
363DTB-18 & 363DTB-24
363TS-22
363TR 363RH 363TP
363TB-18
363DTB-18
363TS-22
18.03
18.03
22.05
MODEL NO.
LENGTH X=inch
use B size
drill 0 238(. )
X
TM
Feature Highlights
▪ Metal construction
▪ Standard finish is polished chrome
Finish Options
Append appropriate-suffix to model number.
▪ STN Satin Nickel finish
Warranty
▪ Limited Lifetime - to the original end purchaser
in residential/consumer installations
▪ 5 years - for commercial installations
363TB-24
23.62
363DTB-24
23.62
After securing your mounting hardware to the wall place
the mounting end of your accessory onto the mounting
hardware as is shown in the picture below.- Affix your
accessory to the mounting hardware using the allen
wrench that shipped with the product.