Installation Guide

4-150
Senior institutional shower head with semi-adjustable spray. Spray face is non-clogging
and non-removable. Anchor plate mounting bracket, all mounting fasteners are vandal
resistant recessed hex socket type.
Suffix A: Anchor plate to simplify mounting on ceramic tile
Suffix B: Back plate and thru bolts for extra thick wall
2 3/4"
70mm
2 3/4"
70mm
3 1/4"
83mm
30˚
1/2" copper supply must protrude
7/8"-22mm from finish wall
bolts supplied for 6"-152mm wall
specify if longer bolts required
7/8"
22mm
5/8"
16mm
5/8"
16mm
7/8"-22mm
finish
wall
anchor plate
must be flush w/finish wall
Head pushes onto
mounting bracket
and is secured with
a single heavy duty
socket head screw
(for maximum van-
dal proofing fill
socket head with
solder or putty).
Mounting bracket sweats
to copper tubing
Back view of
mounting bracket
showing screw
hole locations
front view of
anchor plate showing
wood screw hole locations
Anchor plate used for ceramic tile application—plate
screws to wall and tile is applied up to sides of plate.
Mounting bracket is mounted on finished wall with
machine screws into anchor plate
Wood screws and anchors (supplied)
secure mounting bracket to wall
The back section of head contains
an o-ring that seals on machined
diameter of mounting bracket-
clean and grease mating part
before head installation onto
mounting bracket.
7/8"-22mm
5/8"
16mm
5/8"
16mm
7/8"
22mm
7/8"
22mm
5/8"
16mm
5/8"
16mm
7/8"-22mm
spray
pattern
adjustment
Standard Installation Physical Dimensions
Installation with Anchor Plate — Suffix "A" Installation with Back Plate — Suffix "B"
Symmons Industries, Inc. • 31 Brooks Drive • Braintree, MA 02184
[phone], [phone] • Fax [phone]
Website: www.symmons.com • Email: [e-mail]
©2003, 2008 Symmons Industries, Inc. Printed in U.S.A. • ZV-250 • 051208