Installation Sheet

4-151
Suffix A: Anchor plate to simplify mounting on ceramic tile
Suffix B: Back plate and thru bolts for extra thick wall
Anchor plate used for ceramic tile application—plate
screws to wall and tile is applied up to sides of plate.
Mounting bracket is mounted on nished wall with
machine screws into anchor plate.
Standard Installation
Directional Adjustment
Installation with Anchor Plate — Suffix "A" Installation with Back Plate — Suffix "B"
low setting -10˚
from face of wall
normal setting -30˚
from face of wall
normal setting
right setting -10˚
to right of normal
left setting -10˚
to right of normal
Spray adjust by
loosening socket
set screw
directional
adjusting screw
3 1/2"
89mm
1/2" copper supply must protrude
7/8"-22mm from nish wall
bolts supplied for 6"-152mm wall
specify if longer bolts required
4 1/2"
114mm
3 1/8"
79mm
1"
25mm
3/4"
19mm
3/4"
19mm
1"
25mm
nish
wall
anchor plate
must be ush w/nish wall
Head pushes onto
mounting bracket
and is secured with
a single heavy duty
socket head screw
(for maximum van-
dal proong ll
socket head with
solder or putty).
Mounting bracket sweats
to copper tubing
Back view of
mounting bracket
showing screw
hole locations
Front view of
anchor plate showing
wood screw hole locations
Wood screws and anchors (supplied)
secure mounting bracket to wall
The back section of head contains
an o-ring that seals on machined
diameter of mounting bracket-
clean and grease mating part
before head installation onto
mounting bracket.
1 1/8"
29mm
7/8"
22mm
7/8"
22mm
1 1/8"
29mm
1 1/8"
29mm
7/8"
22mm
7/8"
22mm
1 1/8"
29mm
Symmons Industries, Inc. • 31 Brooks Drive • Braintree, MA 02184
Phone: [phone] • Fax: [phone]
Website: symmons.com • Email: [e-mail]
Copyright © 2017 Symmons Industries, Inc. • ZV-58 REV A • 102717
1
2
3
5
4
Replacement Parts
Item Description Part Number
1
2
Adjustment Screw & O-ring
Set Screw
RO-009
3
4
5
Face Plate
Face Plate Body
Gasket
RO-010