Installation Sheet

6
11. Installation - Slide Bar Assembly
4) Attach cradle arm and washer to cradle mount. Secure
with set screw (FIGURE 11.4).
1
2
FIGURE 11.1
FIGURE 11.4
1
2
1) Press tab to remove mounting plate from cradle mount
cover (FIGURE 11.1).
Note: Mounting plate center tabs must be horizontal for
removal.
2)
Place mounting plate in position, mark and drill 3/16"
holes into drywall. Install anchors (FIGURE 11.2).
Stud Option: Place mounting plate in position, mark
and drill 1/8" pilot holes into stud.
3) Install mounting plate. Secure with two screws.
Replace cradle mount cover (FIGURE 11.3).
Note:
Mounting plate center tabs must be horizontal for
installation.
FIGURE 11.5
1
3
FIGURE 11.2
2
1
3
FIGURE 11.3
2
5) Install wall elbow and flange to recessed pipe fitting.
Turn elbow clockwise to tighten (FIGURE 11.5).
FIGURE 11.6
FIGURE 11.7
6) Attach small end of hand shower hose to wall elbow.
Turn clockwise to tighten (FIGURE 11.6).
7) Attach large end of hand shower hose to hand shower
wand. Turn clockwise to tighten (FIGURE 11.7).