Installation Guide

ManualsBrandsSymmons ManualsKitchenSereno Handshower and Showerhead Combo Kit in Satin Nickel

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621

■

www.symmons.com

■

gethelp@symmons.com

■

ZV-3055 REV 0 09/04/14

4303-TRM, 4305-TRM, 4306-TRM

Sereno

™

Trim Series

Operation & Maintenance Manual

Model Numbers Speciﬁcations

4303-TRM Hand Shower Trim

4305-TRM Shower Trim with Hand Shower

4306-TRM Tub/Shower Trim with Hand Shower

Tub/shower trim with hand shower and lever handle

includes wall connection, cradle for hand shower

mounting, in-line vacuum breaker, exible metal hose,

non-diverter tub spout, 1 mode hand shower and

1 mode showerhead with standard 2.5 gpm (9.5 L/min)

ow restrictor. Shower trim with hand shower and lever

handle includes all of the above less non-diverter tub

spout. Valve trim with hand shower and lever handle

includes all of the above less non-diverter tub spout and

3 mode showerhead. Components made from metal

and nonmetallic materials plated in standard polished

chrome nish.

Modiﬁcations Warranty

-1.5 1.5 gpm (5.7 L/min) ﬂow restrictor

-2.0 2.0 gpm (7.6 L/min) ﬂow restrictor

-432HSB 30" slide bar in place of wall cradle on

hand shower units

-SS Slip spout on any tub and shower unit

-STN Satin nickel ﬁnish

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Note: Append appropriate -sufx to model number.

Summary of content (6 pages)

PAGE 1
4303-TRM, 4305-TRM, 4306-TRM Sereno™ Trim Series Operation & Maintenance Manual Model Numbers Specifications 4303-TRM Hand Shower Trim 4305-TRM Shower Trim with Hand Shower 4306-TRM Tub/Shower Trim with Hand Shower Modifications Tub/shower trim with hand shower and lever handle includes wall connection, cradle for hand shower mounting, in-line vacuum breaker, flexible metal hose, non-diverter tub spout, 1 mode hand shower and 1 mode showerhead with standard 2.5 gpm (9.5 L/min) flow restrictor.
PAGE 2
Dimensions Measurements B A D E C F I G J H M L K Q P N O A Ø 2 1/4", 57 mm B Ø 2 1/4", 57 mm C 6", 152 mm D 9 1/4", 235 mm E Female 1/2" IPS thread must be recessed 7/8" from finished wall F 6", 152 mm right or left G 7", 178 mm H 5", 127 mm I 77", 1956 mm J 4 3/4", 121 mm K 5 3/4", 146 mm L 9 1/4", 235 mm M 10", 254 mm N Ø 2 3/8", 60 mm O 32", 813 mm (4306-TRM) 42", 1067 mm (4303-TRM, 4305-TRM) P 12", 305 mm Q 4 1/2", 114 mm R 3 1/4", 83 mm S 1/2" NPT T 1
PAGE 3
Parts Breakdown Replacement Parts C F E B Q P A D R M H V L K J I L H I J U Y G S O N G T K W X Item Description Part Number A X Vacuum Breaker 60" Hose EF-104 B C Wall Elbow Flange T-444-KIT D Showerhead 432SH E F Shower Arm Flange 300 G H I J Star Washer Handle Plug Button Set Screw T-251 K L Lock Nut Dome Cover T-19/20-PL N M O Mounting Plate Mounting Screws Diverter Escutcheon T-529 P Q R S T Cradle Mount Cradle Mount Screws Washer Cradle Arm Set Screw
PAGE 4
Installation Note: Four valve body installation, please see valve body installation guides. 4) Install shower and diverter dome covers (L) to valves. Secure with lock nut (K). 1 1) Install shower escutcheon (U) to shower valve. Secure with two screws (Y). 6) Install tub spout (W) to pipe fitting. Turn clockwise to secure. L 1 W U 2 1 K Y 1 7) Install wall elbow (B) and flange (C) to recessed pipe fitting. Turn elbow clockwise to tighten.
PAGE 5
Installation 9) Place mounting plate (P2) in position, mark and drill 1/8" pilot holes into stud. 11) Attach cradle arm (S) and washer (R) to cradle mount (P). Secure with set screw (T). 1 P 2 1 P2 R 2 S Option: Place mounting plate (P2) in position, mark and drill 3/16" holes into wall. Install anchors. 14) Attach large end of hand shower hose (X) to hand shower (V). Attach small end of hand shower hose (X) and gasket to in-line vacuum breaker (A).
PAGE 6
Operation Diverter Control Temperature Control 1) Turn shower handle counterclockwise approximately 1/4 turn to put valve in cold position. 2) T urn shower handle counterclockwise approximately 1/2 turn to put valve in warm position. 1) Diverter handle facing straight down is for diverter function 1. 2) 4303-TRM & 4305-TRM: Turn diverter handle counterclockwise one full revolution for diverter function 2. 306-TRM: Turn diverter handle counterclockwise 1/4 4 turn for diverter function 2.