Installation Guide

4
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3055 REV 0 09/04/14
Note:
Four valve body installation, please
see valve body installation guides.
1) Install shower escutcheon (U) to
shower valve. Secure with two
screws (Y).
2) Attach mounting plate (O) to
diverter valve (4305-TRM and
4306-TRM only). Secure with two
screws (M).
3) Attach diverter escutcheon (N) to
plastic mounting plate (O).
Note: Tabs should snap into place.
4) Install shower and diverter dome
covers (L) to valves. Secure with
lock nut (K).
5) Install diverter handle (4305-TRM
and 4306-TRM only) and shower
handle (H) to valves. Secure
handle(s) with star washer (G)
and screw (J). Attach
plug button (I) to handle(s).
Notes: Handles should be facing
the 6 o'clock position.
6) Install tub spout (W) to pipe tting.
Turn clockwise to secure.
7) Install wall elbow (B) and ange (C)
to recessed pipe tting. Turn elbow
clockwise to tighten.
8) Press tab to remove mounting
plate (P2) from cradle mount
cover (P1).
Note: Mounting plate (P2) center
tabs must be horizontal for removal.
1
2
Y
U
1
2
O
M
N
O
1
1
2
L
K
1
1
2
3
I
K
J
H
1
2
W
2
1
P1
P2
1
2
B
C