Installation Guide

3
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3094 REV 0 09/22/14
1) Measure and mark centerlines
for mounting bracket installation
using dimensions on page 2.
Notes: 443TB-18 and 443TB-24 only.
Make sure both centerline marks are
level.
2a) Dry Wall Option: Place mounting
brackets into desired position.
Using brackets as a guide, mark
holes. Screw self-drilling anchors
into wall.
2b) Stud Option: Place mounting
brackets into desired position.
Using brackets as a guide,
carefully drill 3/16" holes
into wall.
3) With mounting brackets in
position, secure to wall using
screws.
4) Slide accessory into position on
bracket and secure with set screw.
1
2
1
3
4
2
1
2
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.