Installation Sheet

ManualsBrandsSymmons ManualsPlumbingWater Dance Collection 4-473-LAM 5.25" Wall Mounted Triple Outlet Diverter Trim with Lever Handle in Polished Chrome

Water Dance

Speciﬁcation Modiﬁcations

Model Numbers

Water Dance triple outlet diverter and trim shall be made

from metal construction. Trim shall be plated in standard

polished chrome nish.

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Measurements

A 5-1/4", 133 mm

B 3-1/4", 83 mm

C 3", 76 mm

Dimensions

Triple Outlet Diverter & Trim

Operation & Maintenance Manual

4-473-LAM

Note: Dimensions subject to change without notice.

Note: Append appropriate -sufx to model number.

☐

4-473-LAM

Water Dance Triple Outlet Diverter and Trim

☐

-STN

Satin Nickel nish

Replacement Parts

Item Description Part Number

Set Screw

Lever Handle

Flange

O-ring

DF-28-LAM*

Lock Nut

Dome Cover

T-19/20-PL*

K Diverter Cartridge RTS-119

*Note:

Append -STN to part number for Satin

Nickel nish.

Tools Required for Installation

Phillips Head

Screwdriver

Parts Breakdown

Summary of content (2 pages)

PAGE 1
Water Dance ® 4-473-LAM Triple Outlet Diverter & Trim Operation & Maintenance Manual Specification Modifications Water Dance triple outlet diverter and trim shall be made from metal construction. Trim shall be plated in standard polished chrome finish. ☐ -STN Satin Nickel finish Note: Append appropriate -suffix to model number. Warranty Limited Lifetime - to the original end purchaser in consumer/residential installations. 5 Years - for industrial/commercial installations. Refer to www.symmons.
PAGE 2
Installation 1) I nstall mounting plate (I) to diverter valve. Secure with two screws (H). 2) A ttach diverter escutcheon (G) to mounting plate (I). 3) I nstall dome cover (F) to valve and secure with lock nut (E). I 2 1 H 2 1 G I E F Note: Tabs should snap into place. Care and Cleaning 4) I nstall o-ring (D), flange (C), and lever handle (B) to valve and secure with set screw (A).