Specification Sheet

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]
Copyright © 2020 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-1874 REV A ■ 032320
Safetymix
®
Specification Modifications
4-500-BODY, 4-500-X-BODY
Heavy Duty Pressure Balancing Shower Valve
Specification Submittal

4-500-BODY
Heavy duty Pressure Balancing shower valve

4-500-X-BODY
Heavy duty Pressure Balancing shower valve with
integral service stops for water shut off at valve for
service
Model Numbers

-X Integral service stops - allows water shut
off at valve for service. Recommended for
use on all multiple commercial installations

-X-3/4" 3/4" valve to increase flow approx. 20%

-X-CHKS Integral check stops - for use in
installations where a positive shut-off
device is used downstream of mixing valve

-X-REV Reverse coring, hot on right, cold on left,
for back to back installations with integral
stops only
Note: Append appropriate -sufx to model number.
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Compliance
-ASME A112.18.1/CSA B125.1
-ASSE 1016
Location:
Safetymix heavy duty Pressure Balancing shower valve
with adjustable stop screw to limit handle turn and
female IPS with sweat inlet/outlet connections.
Valve body constructed from metal materials.
Dimensions
Note: Dimensions subject to change without notice.
AA
II
FF
BB
EE
DD
CC
GG
Shower outlet
port
Shower outlet
port
Service stopsService stops
Adjustable stop
screw to limit
handle turn
Adjustable stop
screw to limit
handle turn
Valve mounting
holes
Valve mounting
holes
COLD supply
inlet port
COLD supply
inlet port
HOT supply
inlet port
HOT supply
inlet port
HH
Measurements
A 5-1/4", 133 mm
B 2-5/8", 67 mm
C (2x) Ø 1/2", 13 mm
D 1-9/16", 40 mm
E 3-1/8", 79 mm
F 5-1/16", 129 mm
G 2-7/8", 73 mm
H 3-5/16", 84 mm
I 9/16", 14 mm
4-500-BODY 4-500-X-BODY