Installation Guide

ManualsBrandsSymmons ManualsBathCanterbury 18 in. Towel Bar in Satin Nickel

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621

■

www.symmons.com

■

gethelp@symmons.com

■

ZV-3095 REV 0 06/16/2014

453RH, 453TB-18, 453TB-24, 453TP, 453TR

Canterbury

™

Accessories

Operation & Maintenance Manual

Model Numbers Speciﬁcations

453RH Robe Hook

453TB-18 18" Towel Bar

453TB-24 24" Towel Bar

453TP Toilet Paper Holder

453TR Towel Ring

All premium accessories made from brass plated in

standard polished chrome nish.

Modiﬁcations Warranty

-STN Satin nickel ﬁnish

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Note: Append appropriate -sufx to model number.

Summary of content (4 pages)

PAGE 1
453RH, 453TB-18, 453TB-24, 453TP, 453TR Canterbury™ Accessories Operation & Maintenance Manual Model Numbers Specifications 453RH Robe Hook 453TB-18 18" Towel Bar 453TB-24 24" Towel Bar 453TP Toilet Paper Holder All premium accessories made from brass plated in standard polished chrome finish. 453TR Towel Ring Modifications -STN Warranty Satin nickel finish Limited Lifetime - to the original end purchaser in consumer installations. 5 Years - for commercial installations. Refer to www.
PAGE 2
Dimensions 453TR 453RH A Measurements E C D B 453TP G H F 453TB-18 I K J E 453TB-24 Ø 2 1/8", 54 mm B 4 5/8", 117 mm C 6", 152 mm D 6 15/16", 176 mm E 3 9/16", 90 mm F 6 7/8", 175 mm G 4 3/16", 106 mm H 3 7/8", 98 mm I 18", 457 mm J 20 1/8", 511 mm K 2 1/8", 54 mm L 24", 610 mm M 26 1/8", 664 mm Required for Installation Phillips head screwdriver Flat head screwdriver L K M A E Power Drill Note: Dimensions are subject to change without notice.
PAGE 3
Installation 1) For 453TB- and 453TB-24, measure and mark centerlines for mounting bracket installation using dimensions on page 2. 2b) Stud Option: Place mountin brackets into desired position. Using brackets as a guide, carefully drill 1/8" holes into wall. 4) H ang top of towel bar on mounting bracket. Lower into position. 1 1 2 Notes: Make sure both centerline marks are level. For 453RH, 453TR and 453TP go to step 6a. 2 2a) Dry Wall Option: Place mounting brackets into desired position.
PAGE 4
Installation 6a) Dry Wall Option: Place mounting brackets into desired position. Using brackets as a guide, carefully drill 3/16" holes into wall and insert wall anchors into drill holes. 7) With mounting brackets in position, secure to wall using screws. 9) Secure with set screw. 1 1 2 3 3 2 8) Hang top of accessory on mounting bracket. Lower into position 6b) Stud Option: Place mounting brackets into desired position. Using brackets as a guide, carefully drill 1/8" holes into wall.