Specification

1-5/16"
(33 mm)
2-5/16"
(59 mm)
1-5/16"
(33 mm)
HOT supply
inlet port
COLD supply
inlet port
Shower outlet
port
4-5/8"
(118 mm)
(opened fully CCW)
Adjustable screw
to limit handle turn
(max temperature)
Service stop
Note: Inlet supply ports are 1/2" sweat
Outlet supply ports are 1/2 sweat
2-5/8"
(67 mm)
2X 1/2" dia
(13 mm)
4-11/16"
(119 mm)
2-5/8"
(67 mm)
1-3/4"
(44 mm)
3/16"
(6 mm)
11/16"
(17 mm)
Tub outlet port
1-5/16"
(33 mm)
Valve mounting
holes in center
of service stops
Dimensions Temptrol Tub-Shower Mixing Valve, 4-port valve with service stops
Warranty
■ Limited Lifetime - to the original end purchaser in
residential/consumer installations.
■ 5 years - for commercial installations
Feature Highlights
■ Symmons Temptrol 4-port pressure balancing mixing
valve with adjustable stop screw to limit handle turn
■ Integral service stops to allow water shut-o for
servicing valve
■ Supply input ports 1/2 inch sweat
■ Output ports NPS threaded 1/2 inch
Model Numbers
46-2X-BODY.......
Tub-Shower Mixing Valve
4-Port Temptrol Tub-Shower,
Shower mixing valve with
integral service stops
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]
Copyright © 2016 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-1520 REV A ■ 021216
Modifications

-IPS
1/2" female IPS connections

-REV
Reverse coring, hot on right, cold on le,
for back to back installations

-CHKS
Integral check stops - for use in
installations where a positive shut-o
device is used downstream of valve
Standards / Certifications
ASME A112.18.1/CSA B125.1
ASSE 1016
Specification Submittal
Temptrol
®
Tub-Shower Mixing Valve 46-2X-BODY
Location: