Installation Sheet

5
8. Installation - Shower Valve Trim
FIGURE 8.1
1
2
FIGURE 8.2
FIGURE 8.3
9. Installation - Diverter Valve Trim
1) Attach arm and flange to shower pipe. Turn clockwise
to tighten (FIGURE 10.1).
2) Install showerhead to shower arm. Turn clockwise to
tighten (FIGURE 10.2).
3) Install tub spout to stub out pipe. Turn clockwise to
tighten (FIGURE 10.3).
FIGURE 10.1
FIGURE 10.2
FIGURE 10.3
10. Installation - Showerhead & Tub Spout
1) Secure large shower escutcheon to Temptrol
pressure balancing valve using mounting screws.
Snap dial into shower escutcheon (FIGURE 8.1).
Note: Dial should be in the 6 o'clock position.
2) Install dome cover by turning clockwise (FIGURE 8.2).
3) Install handle to shower valve. Secure handle with
star washer and screw. Attach plug button to handle
(FIGURE 8.3).
FIGURE 9.1
FIGURE 9.2
FIGURE 9.4
FIGURE 9.3
2) Secure small diverter escutcheon to mounting plate.
Tabs should snap in place (FIGURE 9.2).
1) Secure small mounting plate to Symmons diverter valve
using mounting screws (FIGURE 9.1).
3) Install lock nut and dome cover by turning clockwise
(FIGURE 9.3).
4) Install handle to diverter valve. Secure handle with
star washer and screw. Attach plug button to handle
(FIGURE 9.4).