Installation Guide

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621

■

www.symmons.com

■

gethelp@symmons.com

■

ZV-3096 REV 0 06/18/2014

473RH, 473TB-18, 473TB-24, 473TP, 473TR

Allura

Accessories

Operation & Maintenance Manual

Model Numbers Speciﬁcations

473RH Robe Hook

473TB-18 18" Towel Bar

473TB-24 24" Towel Bar

473TP Toilet Paper Holder

473TR Towel Ring

All premium accessories made from brass plated in

standard polished chrome nish.

Modiﬁcations Warranty

-STN Satin nickel ﬁnish

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Note: Append appropriate -sufx to model number.

PAGE 1
473RH, 473TB-18, 473TB-24, 473TP, 473TR Allura® Accessories Operation & Maintenance Manual Model Numbers Specifications 473RH Robe Hook 473TB-18 18" Towel Bar 473TB-24 24" Towel Bar 473TP Toilet Paper Holder All premium accessories made from brass plated in standard polished chrome finish. 473TR Towel Ring Modifications -STN Warranty Satin nickel finish Limited Lifetime - to the original end purchaser in consumer installations. 5 Years - for commercial installations. Refer to www.symmons.
PAGE 2
Dimensions Measurements 473TR 473RH C A B E D 473TP A F H G 473TB-18 I A K J 473TB-24 L A Ø 2 1/4", 57 mm B 3 7/8", 98 mm C 6", 152 mm D 7", 178 mm E 3 1/2", 89 mm F 4 5/16", 110 mm G 6 7/8", 175 mm H 3 1/2", 89 mm I 18", 457 mm J 20 1/4", 514 mm K 3 1/2", 89 mm L 24", 610 mm M 26 1/8", 665 mm Required for Installation Phillips head screwdriver Allen wrench, 3/16" A M K Power Drill Note: Dimensions are subject to change without notice. 2 Symmons Industries, Inc.
PAGE 3
Installation 1) Measure and mark centerlines for mounting bracket installation using dimensions on page 2. 2b) Stud Option: Place mounting brackets into desired position. Using brackets as a guide, carefully drill 3/16" holes into wall. 4) Fully slide accessory body over mounting plate and secure with set screw. 1 1 2 Notes: 473TB-18 and 473TB-24 only. Make sure both centerline marks are level. 2a) Dry Wall Option: Place mounting brackets into desired position.