Installation Guide

Page 4
12"
(305 mm)
13"
(331 mm)
7-5/8"
(195 mm)
nished
wall
Floor
HOT / COLD
supply inlet
showerhead
supply
5/8" (16 mm)
1/2"
(13 mm)
7" dia
(178 mm)
2-1/2" dia
(64 mm)
1/2"-14 NPT
mounting plate
p/n T-177
*
Note (1)
Temptrol
control
valve
*
Notes: (also reference page 2, figure 2 for details)
(1) Walls for using T-177 mounting plate (MP)
■ Wall is 1/16" (2 mm) min • 1/2" (13 mm) max
■ Fiber or acrylic walls (MP is required)
■ Plaster or other type walls 1/2" or less (MP optional)
■ Protective shield usage (optional for protection only)
(2) Dry wall, plaster or other type walls 1/2" or greater
■ Protective shield attached to valve spindle to locate position
(3) Dimensions subject to change without notice
Wall cutout hole size
3-1/2" (89 mm) min
4" (102 mm) max
Finished wall to rear of valve
3-1/2"
±
1/2" (89 mm
±
13 mm)
Finished wall to pipe centerline
2-3/8"
±
1/2" (60 mm
±
13 mm)
*see note (2)
Protective
shield
p/n T-176
8"
(204 mm)
2-1/2" dia
(64 mm)
approximately
Shower only = 48" (1219 mm)
Tub-Shower = 32" (813 mm)
Model Series
5400
5400-X
5401
5401-X
5402
5402-X
tub spout
supply or
supply plug
COLD
supply
inlet
Model Series
5402
5402-X
Model Series
5401
5401-X
5402
5402-X
HOT
supply
inlet
approx
80"
(1956 mm)
1/2"-14 NPT
1/2"
(13 mm)
1/4"
(6 mm)
3-3/4"
(95 mm)
2-3/8" ±1/2"
(60 mm ±13 mm)
Dimensions Degas Tub-Shower Systems, 5400, 5401, 5402 Series