Specification Sheet

Unity

™

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621

Model Numbers

Dual Outlet Diverter

Speciﬁcation Submittal

66-2DIV

Dual outlet diverter made from metal and nonmetallic

materials plated in standard polished chrome nish.

Speciﬁcation

Location:

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.

Compliance

Modiﬁcations

Note: Append appropriate -sufx to model number.



-TRM Trim only, valve not included



-STN Satin Nickel ﬁnish



66-2DIV

Unity Dual Outlet Diverter

Dimensions

Measurements

A 3 3/4”, 95 mm

Diverter Valve Hole Size

Min. Ø 3”, 76 mm

Max. Ø 3 1/4”, 83 mm

C 3 1/2”, 89 mm

D 3 1/8”, 79 mm

E Ø 4 1/4”, 108 mm

F 3 1/2”, 89 mm

Note: Dimensions subject to change without notice.

FLOORFLOOR

-ASME A112.18.1/CSA B125.1

Reset Form

PAGE 1
Location: Unity™ 66-2DIV Dual Outlet Diverter Specification Submittal Model Numbers Specification  66-2DIV Dual outlet diverter made from metal and nonmetallic materials plated in standard polished chrome finish. Unity Dual Outlet Diverter Modifications  -TRM  -STN Trim only, valve not included Warranty Satin Nickel finish Note: Append appropriate -suffix to model number. Limited Lifetime - to the original end purchaser in consumer/residential installations.
PAGE 2
Emplacement: Unity™ 66-2DIV Organe de dérivation double Présentation des spécifications Numéro de modèle Spécification  66-2DIV L’organe de dérivation double est fait matériaux métalliques et non métalliques au fini chrome poli standard. Organe de dérivation double Unity Modifications  -TRM  -STN Garniture seulement, vanne non incluse Garantie Fini nickel satiné Remarque: Juxtaposer le -suffixe approprié au numéro de modèle. Conforme -ASME A112.18.1/CSA B125.