Installation Guide

4
1
2
F
E
2) Attach shower escutcheon (D) to
mounting plate (F).
1
D
F
1) Install mounting plate (F) to
shower valve. Secure with two
screws (E).
4) Install handle (A) to valve and
secure with set screw (B).
A
B
1
2
5) Install tub spout (O) to pipe tting.
Turn clockwise to secure.
Installation
Note:
For valve body installation, please
see valve body manual.
7) Place mounting plate (J) in po-
sition, mark and drill 3/16” holes
for tile anchors (J1), 5/16” holes
for drywall anchors (J2). Install
anchors.
2
3
1
J
J2
4
J1
J2
J3
3) Install dome cover (C) to valve by
turning clockwise.
1
2
C
6) Install wall ell (K) to pipe tting.
Tighten set screw (L) to secure.
L
K
1
2
8) Remove cover of hand shower
cradle (H) . Install cradle and
mounting plate (J) . Secure with
three screws (I) . Replace cover
on hand shower cradle.
4
3
2
1
H
I
J
Note: Tabs should snap into place.
Note: Handle should be facing the
6 o’clock position.
1
O
2
Note: For dry wall 1/2” thick or less,
insert anchor tool (J3) into drywall
anchor (J2) to secure behind wall
prior to installing wall cradle.