Specification

Unity
™
Model Numbers
Shower/Hand Shower System
Specification Submittal
6605
Shower/hand shower system powered by the
Temptrol
®
Pressure Balancing valve. Features
adjustable stop screw to limit handle turn, wall cradle,
separate two function diverter, in-line vacuum breaker, 60”
exible metal hose, hand shower, 1 mode showerhead
with easy to clean rubber nozzles and standard 2.5
gpm (9.5 L/min) ow restrictors. Components made
from metal and nonmetallic materials plated in standard
polished chrome nish.
Specification
Location:
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Compliance
Modifications
Note: Append appropriate -sufx to model number.

6605
Unity Shower/Hand Shower System

-1.5 1.5 gpm (5.7 L/min) flow restrictor

-2.0 2.0 gpm (7.6 L/min) flow restrictor

-143 Euro-Flo three mode showerhead in
place of Clear-Flo

-145 Euro-Flo five mode showerhead in place
of Clear-Flo

-231 Super showerhead in place of Clear-Flo

-X Integral service stops

-CHKS Integral check stops

-IPS 1/2” female IPS connections

-REV Reverse coring for back to back installa-
tions

-LP Loop handle

-QD
Quick disconnect on hand shower units

-R
White vinyl hose in place of metal hose

-OP 13” oval plate

-L/HD
Less showerhead

-72
6’ hose in place of 5’ standard

-TRM Trim only, valve not included

-STN Satin Nickel finish
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
2.0 gpm (7.6 L/min)
Certied by
CSA Group
Print
Reset Form