Specification Sheet

Origins
®
Feature Highlights Options/Modifications
S-9604-PLR, S-9604-PLR-TRM, S9604PLRTRMTC
Tub/Hand Shower System or Trim
Specification Submittal
Location:
Note: Append appropriate -sufx to model number.
☐
-1.5 1.5 gpm (5.7 L/min) flow restrictor
☐
-2.0 2.0 gpm (7.6 L/min) flow restrictor
☐
-72 72" hose in place of 60" hose
☐
-ADAHS ADA hand shower wand (white)
☐
-B Brass escutcheon (chrome only)
☐
-B30 30" slide bar in place of 36" grab bar
☐
-B48 48" slide bar in place of 36" grab bar
☐
-CHKS Integral check stops - for use in installations
where a positive shut-off device is used
downstream of mixing valve
☐
-D Brass dome cover (chrome only)
☐
-H321-V 1 mode hand shower unit with slide bar
☐
-H323-V 3 mode hand shower unit with slide bar
☐
-L2 Less hand shower wand
☐
-LAM Metal finish insert handle
☐
-LP Loop handle
☐
-L/GB Less grab bar
☐
-OP 13" oval plate
☐
-QD Quick-disconnect on hand shower units
☐
-R 60" white vinyl hose in place of 60" metal hose
☐
-REB Rebuild trim kit, includes TA-10 and TA-4
☐
-SS Slip spout on any tub/shower unit
☐
-T724 24" slide bar/grab bar with ADA wand
☐
-T748 48" slide bar/grab bar with ADA wand
☐
-VB Elevated vacuum breaker
☐
-VP Vandal resistant escutcheon screws in place of
standard screws
☐
-X Integral service stops - allows water shut-off at
valve for service
☐
-STN Satin Nickel finish
CG
Model Numbers
Compliance
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete warranty information.
Go to www.symmons.com/register to register your Symmons product.
• Origins Tub/Hand Shower System or Trim
• Requires Temptrol
®
Pressure Balancing Tub/Shower Valve
(included with S-9604-PLR)
• Adjustable stop screw to limit handle turn
(included with S-9604-PLR)
• Integral diverter control
• Metal lever handle
• ADA 36" grab bar for hand shower
• Dual checks for backow protection
• 60" exible metal hose
• ADA 1 mode hand shower with non-positive shut-off
• 5-1/4" non-diverter tub spout
• Showerhead not included
• Components shall be metal and nonmetallic construction, plated in
standard Polished Chrome nish
• Available with TA-10 ow control spindle and T-12A cap assembly
for Temptrol valve bodies installed with Test Cap
(order p/n S9604PLRTRMTC)
• For optional in-line vacuum breaker order p/n EF-109
☐
S-9604-PLR
Tub/Hand Shower System with integral diverter control &
Temptrol Pressure Balancing Tub/Shower Valve
☐
S-9604-PLR-TRM
Tub/Hand Shower Trim with integral diverter control,
Temptrol Pressure Balancing Tub/Shower Valve ordered separately
☐
S9604PLRTRMTC
Tub/Hand Shower Trim with integral diverter control,
TA-10 ow control spindle and T-12A cap assembly, must order
Temptrol valve with Test Cap
• ASME A112.18.1/CSA B125.1
• Buy American Act (S-9604-PLR only)