Specification

Origins
®
Location:
Specification
Shower/hand shower system powered by the Temptrol
®
Pressure Balancing valve shall include adjustable stop
screw to limit handle turn, 36" slide bar, separate dual
outlet diverter, in-line vacuum breaker, 60" exible metal
hose, ADA hand shower, 1 mode showerhead with easy
to clean rubber nozzles and standard 2.5 gpm (9.5 L/min)
ow restrictors. Components shall be made from metal
and nonmetallic construction, plated in standard polished
chrome nish.
Modifications
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Finish Options
Model Numbers
Note: Append appropriate -sufx to model number.
☐
-1.5
1.5 gpm (5.7 L/min) ow restrictor
☐
-2.0
2.0 gpm (7.6 L/min) ow restrictor
☐
-72
72" hose in place of 60" hose
☐
-143
3 mode showerhead in place of standard head
☐
-145
5 mode showerhead in place of standard head
☐
-231
Super showerhead in place of standard head
☐
-295
Institutional showerhead (chrome only)
☐
-ADAHS
ADA hand shower wand (white)
☐
-B
Brass escutcheon (chrome only)
☐
-CHKS
Integral check stops - for use in installations
where a positive shut-off device is used
downstream of mixing valve
☐
-D
Brass dome cover (chrome only)
☐
-H321-V
1 mode hand shower unit with slide bar in place
of standard hand shower unit
☐
-H323-V
3 mode hand shower unit with slide bar in place
of standard hand shower unit
☐
-IPS
1/2" female IPS connections
☐
-LAM
Lever handle
☐
-LP
Loop handle
☐
-L/HD
Less showerhead
☐
-L/HS
Less hand shower
☐
-NS
Non-shared diverter valve for 9605 and 9606
☐
-OP
13" oval plate (PLR only)
☐
-QD
Quick-disconnect on hand spray units
☐
-R
60" white vinyl hose in place of 60" metal hose
☐
-REB
Rebuild trim kit, includes TA-10 and TA-4
☐
-REV
Reverse coring, hot on right, cold on left, for
back to back installations
☐
-T724
24" slide bar/grab bar with ADA hand shower in
place of standard hand shower unit
☐
-T748
48" slide bar/grab bar with ADA hand shower in
place of standard hand shower unit
☐
-VB
Elevated vacuum breaker
☐
-VP
Vandal resistant escutcheon screws in place of
standard screws
☐
-X
Integral service stops - allows water shutoff at
valve for service
CG
CG
Compliance
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
2.0 gpm (7.6 L/min)

-STN
Satin Nickel finish

9605-PLR
Origins shower/hand shower system

9605-PLR-TRM
Origins shower/hand shower, trim only

46-2-BODY
Temptrol Pressure Balancing tub/shower valve body

46-2X-BODY
Temptrol Pressure Balancing tub/shower valve body
with stops

2DIV-BODY
Symmons dual outlet diverter valve
Certied by
CSA Group
9605-PLR
Shower/Hand Shower System
Specification Submittal