Specification

Origins
™
Model Numbers
Tub/Shower/Hand Shower System
Specification Submittal
S-9606-PLR
Tub/shower/hand shower system powered
by the Temptrol
®
Pressure Balancing valve.
Features adjustable stop screw to limit handle turn,
integrated volume control, 36” slide bar, separate two
function diverter, non-diverter tub spout, in-line vacuum
breaker, 60” exible metal hose, ADA hand shower, 1
mode showerhead with easy to clean rubber nozzles
and standard 2.5 gpm (9.5 L/min) ow restrictors.
Components made from metal and nonmetallic materials
plated in standard polished chrome nish.
Specification
Location:
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Compliance
Modifications
Note: Append appropriate -sufx to model number.

S-9606-PLR
Origins Tub/Shower/Hand Shower System

-1.5 1.5 gpm (5.7 L/min) flow restrictor

-2.0 2.0 gpm (7.6 L/min) flow restrictor

-231 Super showerhead in place of Clear-Flo

-295 Institutional showerhead in place of
Clear-Flo

-SS Slip spout on any tub/shower unit

-X Integral service stops

-CHKS Integral check stops

-IPS 1/2” female IPS connections

-REV Reverse coring for back to back installa-
tions

-LP Loop handle

-B Chrome brass escutcheon

-D Chrome brass dome cover

-VP Vandal proof escutcheon screws

-QD
Quick disconnect on hand shower units

-R
White vinyl hose in place of metal hose

-VB
Elevated vacuum breaker

-OP 13” oval plate

-L/HD
Less showerhead

-72
6’ hose in place of 5’ standard

-B30
30” adjusting bar in place of standard 36”
bar

-B48
48” adjusting bar in place of standard 36”
bar

-L/GB
Less grab bar

-T24
24” grab bar in place of standard 36” bar

-TRM Trim only, valve not included

-STN Satin Nickel finish
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
2.0 gpm (7.6 L/min)
Certied by
CSA Group
Print
Reset Form