Specification Sheet

SYMMONS PRODUCTS MEET
ANSI A112.18.1M, EPA ‘92
AND ALL KNOWN FLOW RATE
REQUIREMENTS.
Shower Heads and Hand Showers
2.5 GPM (9.5 L/min)
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184
[phone], [phone] ■ Fax [phone]
Website: www.symmons.com ■ Email: customers er vi ce @s ym mo ns .c om
©2003, 2008 Symmons Industries, Inc. Printed in U.S.A. ■ 042808
Job/Location
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Engineer
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Contractor
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
This drawing to be used for rough-
in installation only. All floor to center
dimensions optional. Concealed pip-
ing and fittings not furnished by manu-
facturer. Dimensions are for ADA compli-
ance (Americans with Disabilities Act) consult
ADAAG or your state regulations for proper
product choice and mounting locations. For
complete installation, adjustment and service
information see installation instructions.
BP-56-500-B30-V
Temptrol II
™
Shower
System with Hand Spray
Temptrol II (BP Series) Pressure Balancing mixing valve with adjustable
stop screw to limit handle turn. Clear-Flo shower head with arm and
flange. Lever diverter with integral volume control. Wall/hand shower
with 5’ flexible metal hose, in-line vacuum breaker, wall connection and
flange. 30” slide bar for hand shower mounting.
Modifications:
Suffix X: Integral service stops—allows water shut-off at valve for
service
Suffix B: Chrome brass escutcheon on valve
Suffix B48: 48” adjusting bar in place of standard 30” bar
Suffix 6: 6’ hose in place of standard 5’ hose
Male 1/2” I.P.S. thread must protrude 3/8” (10mm) from
finished wall for proper installation of street ell and flange.