Installation Sheet

Commercial Series Pressure-Balancing Mixing Valve for Shower or Tub/Shower Application
INSTALLATION, OPERATION & SERVICE INSTRUCTIONS
Symmons valves and shower heads comply to all known standards, codes and
specifications: CSA B-125, ANSI A112.18.1M, ASSE 1016, EPA ‘92 etc.
Symmons shower heads are equipped with a 2.5 GPM (9.5 L/min) water and energy
saving flow restrictor.
IMPORTANT: After completion of installation step 4, follow these instructions to set
the Temptrol Limit Stop Screw. This valve is equipped with a limit stop screw to be
used to limit valve handle from being turned to excessively hot water discharge tem-
peratures. To adjust, remove dome cover, open valve to maximum desired tempera-
ture and turn in limit stop screw until it seats.
WARNING: FAILURE TO AdjUST ThE LIMIT STOP SCREW PROPERLy MAy RESULT
IN SERIOUS SCALdING.
WARNING: ThIS ShOWER SySTEM MAy NOT PROTECT ThE USER FROM SCALd-
ING WhEN ThERE IS A FAILURE OF OThER TEMPERATURE CONTROLLING
dEVICES ELSEWhERE IN ThE PLUMbING SySTEM.
PLEASE REAd ALL INSTRUCTIONS CAREFULLy bEFORE STARTING
INSTALLATION. SAVE ThIS MANUAL FOR FUTURE REFERENCE.
COMMERCIAL LIMITED WARRANTY
Symmons warrants to the original purchaser that any Symmons product (excluding Symmons electr
onic
products) when used in industrial, commercial or business use will be free of defects in material
and
workmanship during normal use for a period of 5 years from the date of purchase. Symmons electr
onic
products (excluding batteries) when used in industrial, commercial or business use will be free of
defects
in material and workmanship during normal use for a period of 3 years from the date of purchase.
At
our option, we will either have you send the defective part or product prepaid to us for inspection,
or
we may elect to send you the replacement part or product without investigation. A replacement for
any
defective part will be supplied FREE OF CHARGE for installation by the purchaser. Defect or
damage
caused by the use of replacement parts other than Symmons Genuine Replacement Parts will void
this
warranty. This warranty excludes product damage due to installation error, product abuse, or pr
oduct
misuse whether performed by a contractor, service company or yourself.
Damage to the chrome and/or other decorative finishes on Symmons products may be a result
of
improper handling or abusive treatment. Finishes should only be cleaned with a soft, damp cloth
or
sponge. Use of polish, abrasive cleaners, solvents, or acid cleaners will damage the finish and void
this
warranty.
There are no other express warranties on this product and ALL WARRANTIES OF MERCHANTABILITY
AND
OTHER IMPLIED WARRANTIES ARE LIMITED IN ACCORDANCE WITH APPLICABLE LAW. SYMMONS
INDUSTRIES, INC., EXPRESSLY DISCLAIMS CONTINGENT LIABILITY AND CONSEQUENTIAL DAMAGE
OF
EVERY KIND. Since some states do not allow limitations on how long an implied warranty lasts or
an
exclusion or limitation of incidental or consequential damages the above limitation or exclusion may
not
be applicable. This warranty gives specific legal rights. Other rights may vary from state to state.
To obtain warranty service, write to Symmons Industries, Inc., 31 Brooks Drive, Braintree, M
A
02184-3804 or call our Customer Service Department at 1-800-SYMMONS. If writing to us,
please
include proof of purchase, the model number of the product with a brief description of the pr
oblem,
your name, address and phone number.
Temptrol
®