Installation Guide

ManualsBrandsSymmons ManualsPlumbingLaundry Mate 1/2 in. Plastic Drain Box with Brass Valve

LaundryMate

Model Numbers Feature Highlights

LM600

LaundryMate® Valve

Operation & Maintenance Manual

☐

LM600 LaundryMate® drain box with Valve • Installation straps for 16" O.C. single stud bay mounting

or direct-to-stud mounting

• 1/2-14 NPSM with 1/2" female sweat inlets, 3/4" male

outlets

• Valve can be installed as bottom or top supply

• Accommodates 1 layer of 1/2" drywall up to 2 layers of

5/8" drywall

• 2'' PVC female direct glue drain

• Mounting straps

• 1/4 turn ball valves with color coded handles

Compliance

- ASME A112.18.1/CSA B125.1

- ASSE 1010 (LM600A only)

- NSF 61.9, NSF 372

Options/Modiﬁcations

☐

A Water hammer arrestor size AA

☐

F Funnel

☐

P1 Crimp PEX

☐

P2 Cold expansion PEX

Note: Append appropriate -sux to model number.

Dimensions

Measurements

A 7", 178 mm

B 6-5/8", 168 mm

C 17-1/2", 445 mm

D 2 1/2" 64mm

E 2 3/4" 70mm

Min. 1/2", 13 mm

Max. 1-1/4", 32 mm

G 16" O.C. REF, 406mm

Limited Lifetime - to the original end

purchaser in consumer/residential

installations.

10 Years - for commercial/industrial

installations. Refer to

www.symmons.com/warranty for

complete warranty information.

Warranty

Note: Dimensions subject to change without notice.

Summary of content (2 pages)

PAGE 1
LaundryMate® LM600 LaundryMate® Valve Operation & Maintenance Manual Model Numbers Feature Highlights ☐ • LM600 LaundryMate® drain box with Valve Options/Modifications • ☐ ☐ ☐ A Water hammer arrestor size AA F Funnel • • P1 Crimp PEX ☐ P2 Cold expansion PEX • • • Note: Append appropriate -suffix to model number. Compliance - ASME A112.18.1/CSA B125.1 - ASSE 1010 (LM600A only) - NSF 61.9, NSF 372 c Installation straps for 16" O.C.
PAGE 2
Installation 8 6 9 5 2 1 4 7 3 Section A Section A (Steps 1-10) 1. Slide straps in mounting tabs 2. Attach strap to studs with user provided screws 3. Secure valve to box with two supplied nuts 4. Glue 2’’ PVC pipe into bottom of drain box 5. Knockout outside two holes of supply box for hot and cold supply (shown in A.1) 6. Insert provided screws through tabs to secure box in place 7. Connect supplies to valves with either: a. Sweat connect b.