Installation Guide

ManualsBrandsSymmons ManualsBathOrigins 8 in. Widespread 2-Handle Bathroom Faucet with Drain Assembly in Chrome

Non-

Removable Removable

stopper stopper

Quick Install Guide Symmetrix Widespread Lavatory Faucet, S-243-2-LAM

Fasten drain body to sink

Step 5

Attach faucet handles

Step 2

Step 1

Attach control valves to sink

Step 1

SAttach faucet spout to sink

Step 3

Attach pivot rod to drain body

Step 7

Connect lift rod, clevis strap,

pivot rod and adjust linkage

Step 8

Install stopper and

set eye position

Step 6

Flush water supply lines

Step 10

Attach drain body to drain trap

Step 9

Step 4

SConnect water supply lines

Plumbers

Putty

Pipe

Sealant

Widespread Lavatory Faucet S-243-LAM Series

Installation and Service Instructions

Symmetrix

Tools & Materials

 Need Help?

Contact Symmons customer service at

(800) 796-6667, (781) 848-2250

Email: customerservice@symmons.com

Monday - Friday 8:00 am - 7:30 pm EST

 Please check Symmons website

for technical help, the latest product

information and warranty policy.

www.symmons.com/service

Model Numbers

S-243-2-LAM

Lavatory faucet

with pop-up drain

S-243-1-LAM

Lavatory faucet

with lift rod only

S-243-LAM

Lavatory faucet

Alternate Finish Code

append to part numbers when applicable

-STN

Satin Nickel

Chrome (standard)

Summary of content (4 pages)

PAGE 1
Symmetrix® Widespread Lavatory Faucet S-243-LAM Series Installation and Service Instructions Model Numbers S-243-2-LAM S-243-1-LAM S-243-LAM Lavatory faucet with pop-up drain Lavatory faucet with lift rod only Lavatory faucet Tools & Materials Alternate Finish Code append to part numbers when applicable -STN Satin Nickel -- Chrome (standard)  Need Help? Contact Symmons customer service at (800) 796-6667, (781) 848-2250 Email: customerservice@symmons.
PAGE 2
Installation Instructions Caution: If replacing an older faucet ensure water supply is turned OFF before removing. Then turn faucet control valves ON to relieve water pressure. Step 1 Attach control valves to sink ■■ Thread flange nut about 2 inches down from threaded end of valve body. Ensure larger diameter end is facing up. ■■ Insert valve body from underneath sink up through mounting hole. Ensure valve with red label (hot) is on the left and blue (cold) is on the right.
PAGE 3
Step 10 Flush water supply lines Step 6 Install stopper and set eye position Stopper can be removable or non-removable determined by position of eye hole when later inserting pivot rod. ■■ Insert stopper through flange opening and position eye hole. ■■ Thoroughly flush supply lines to prevent foreign matter, i.e. copper chips, remove sand, etc. from damaging aerator the sealing surface inside control valves. ■■ Remove aerator from end of faucet water spout.
PAGE 4
Dimensions Symmetrix Widespread Lavatory Faucet, S-243-2-LAM 8" (203 mm) min. 16" (406 mm) max. 6-1/8" 156 mm 4" (102 mm) min. 1-15/16" (49 mm) 7-3/8" 187 mm 5-3/16" 55 mm 2-1/4" (57 mm) 2" dia. (51 mm) Deck thickness 1-3/8" (35 mm) max. 5-1/8" 130 mm 4-7/8" 124 mm 1-7/8" 47 mm 2-7/16" 62 mm dia. 13/16" dia. (21 mm) Hole size 1-1/8" (29 mm) min. 1-1/2" (38 mm) max. 1" dia. (25 mm) Hole size 1-1/16" (27 mm) min. 1-7/16" (37 mm) max.