Installation Guide

Step 5 Connect water supply lines
Step 6 Flush supply lines and check for leaks
Care of faucet finish
Clean nish area by using mild soap and water or non-
abrasive cleaner and then rinse immediately. A non-
abrasive wax may be used to preserve nish area.
Removing handle and cartridge
Replace collar and handle
Valve cartridge replacement
2.5 mm
1
2
cold water
HOT
COLD
Suggested method
Items listed below are shown
for reference only and not
included with this product.
1/2" IPS tting
3/8" ex hose
3/8" compression tting
1/2"-14 NPT
ttings included,
use as required
2.5 mm
Page 3